This is our standard offset shank worm hook. The O'Shaughnessy bend is preferred by our top pro Aaron Martens for a variety of soft plastic rigging.
Weston's 150 pound Spring Scale great for weighing catch or setting drag. Constructed of anodized aluminum with stainless steel hooks, for a lifetime of trouble free use.
4" diamond coated hook and knife file, md grit side has double grooves. When sharpening the hook, always start with the md grit side. The side with two grooves. Hold the hook flat in the bottom of the groove, and pull from one end to the other a couple times. Then flip over the file and do same thing once on the fine grit side. Test to see if hook is sharp enough on your fingernail, if it sticks easily it is, if not go back to the md grit side and pull the hook along the length of the groove at an angle - lean the hook into the side of the groove, one pull on the left side, one on the right, and the last right down the middle. Then back to the fine grit side and test again.Features:Diamond coated flat section for sharpening knife bladeDouble Groove MD grit to increase performance and longevityRounded ends to reduce harm to pockets and increase comfortRubber grip for control and comfortAttachment leash so you don't lose it
Beast Hooks with TwistLOCK Centering-Pin Spring (CPS) are designed for weedless-style rigging of larger plastics like big swimbaits, flukes, tubes and creature baits. With its TwistLOCK Centering-Pin Spring (CPS - patent pending) attached to the hook eye, baits can be permanently secured by inserting the pin in the center of the nose of a soft plastic, which can then be screwed onto the TwistLOCK coil spring to rig perfect everytime! Different Size springs are matched to hook size to maximize holding power. Quick-drop shank below eye allows for rigging fat-headed baits, and maximum gap allows for improved hook sets because of better bait clearance. The non-movable weight attached (5130W) not only helps to sink or swim a rigged bait down into the strike zone, but because the weight is positioned so low on the shank, it provides a keel effect. As a result, when rigging large swimbaits weedless-style, plastics swim naturally (as opposed to rolling or flipping where weights are inserted inside soft baits). Ideal for both fresh and saltwater fishing, features include a TwistLOCK Centering-Pin Spring (CPS - patent pending) attached to the hook eye, maximum gap, a XXX-strong forged shank, Super Needle Point, and black chrome finish.
Great value for the price. Compare prices with other quality hooks. Ideal for baiting up nightcrawlers and minnows for walleye and panfish, and for rigging crabs, shrimp and blood worms for surf and bay fishing. Features include black chrome finish, up-eye forged shank and reversed-bend super needle point.
This is the hook to use when tying glo bugs and other egg patterns
ST-41 TREBLES, 2X strong with a corrosion-resistant black chrome finish, are the ideal replacement hooks for improving the hooking power of heavy freshwater and most varieties of saltwater plugs, spoons and die-cast jigs. Lethal when used as a ?stinger? for rigging natural baits. Features include a short shank, round bends and three slightly curved in Cutting Points?.
Recommended Hook size: 2/0 to 9/0; T Handheld model; 16" long x 3/16" diameter; made of durable 304L-316th grade stainless steel; Perfect for most small to medium size fresh water or saltwater innshore species; Avoid the unexpected cuts and jabs from not having to handle your catch when releasing them safely back to the water; Increase survival by not removing your released catch from the water.
Top Search
Last Search
